CCNP TSHOOT CHAPTER 3 (VTP)
5. List some important point relates to VTP ?
6. List verification steps of VTP ?
-->
Solution:
5. List some important point relates to VTP ?
-->
1.vtp versions are not compatible: ver1,2,3.
2.vtp need trunk to replicate vlans.
3.if you want to reset the configuration revision number change the domain.
CR will reset to 0 , then u can change the doamin as your original domain.
4.vtp transparent mode does not replicate vlan information , because its
CR value is always zero.
5. VTP domain-name must be same.
6. VTP rewrites vlan information according to its highest C R number.
6. List verification steps of VTP ?
--->
1. sh vtp status
2. sh vtp password
3. sh interface fa0/5 switchport | ex private|Unknow
4. sh cdp neighbour
SW1#sh vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : cisco
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 0015.6264.3300
Configuration last modified by 0.0.0.0 at 3-1-93 00:53:51
Feature VLAN:
--------------
VTP Operating Mode : Transparent
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0x50 0x10 0x84 0x08 0x73 0x6A 0x6B 0x40
0x65 0x5A 0x0D 0x68 0x19 0x17 0x94 0x6B
SW1#sh vtp password
VTP Password: cisco
SW1#sh cdp neig
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
5. List some important point relates to VTP ?
6. List verification steps of VTP ?
-->
Solution:
5. List some important point relates to VTP ?
-->
1.vtp versions are not compatible: ver1,2,3.
2.vtp need trunk to replicate vlans.
3.if you want to reset the configuration revision number change the domain.
CR will reset to 0 , then u can change the doamin as your original domain.
4.vtp transparent mode does not replicate vlan information , because its
CR value is always zero.
5. VTP domain-name must be same.
6. VTP rewrites vlan information according to its highest C R number.
6. List verification steps of VTP ?
--->
1. sh vtp status
2. sh vtp password
3. sh interface fa0/5 switchport | ex private|Unknow
4. sh cdp neighbour
SW1#sh vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : cisco
VTP Pruning Mode : Disabled
VTP Traps Generation : Disabled
Device ID : 0015.6264.3300
Configuration last modified by 0.0.0.0 at 3-1-93 00:53:51
Feature VLAN:
--------------
VTP Operating Mode : Transparent
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0x50 0x10 0x84 0x08 0x73 0x6A 0x6B 0x40
0x65 0x5A 0x0D 0x68 0x19 0x17 0x94 0x6B
SW1#sh vtp password
VTP Password: cisco
SW1#sh cdp neig
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
No comments:
Post a Comment